Safety Floating Baby Bath Tub Water Temperature Thermometer

Safety Floating Baby Bath Tub Water Temperature Thermometer

Details About This Baby Bath Themometer:

 1. Assemble battery or reset,the LCD screen will display 2 seconds;

2. If testing environment temperature reach to max level,the LCD screen will show HH.H℃(HH.H℉);if testing temperature reach to minimum level,the LCD screen will show LL.L℃(LL.L℉);

3. For ℃/℉ button,short press the button,it will change temperature unit-℃ or ℉(in any situation);

4.SET button:Long press SET button with 3seconds enter into High temperature setting interface,HOT and ℃/℉ flashing;if no any operation after enter into High temperature setting interface,then automatically quit from the High temperature setting interface and back to temperature display interface; if have button operation in High temperature setting interface,short press SET button to quit and save the operated setting temperature;

5. + button: In Hot temperature setting interface,short press + button,then the hot temperature setting will be recycled 40℃(104℉)-37℃(99℉)-38℃(100-101℉)-39℃(102-103℉)40℃(104℉)and by turn;

6. Indicator light:

1) .Low temperature alarm indicating,when the testing environment temperature lower than 30℃(86℉),the green indicator light will be flashing by 1second/time,and it will show COOL in the left bottom of LCD screen;

2) Hight temperature alarm indicating,when testing environment temperature higher than setting temperature but lower than 80℃(176℉),the red indicator light will be flashing by 1second/time and it show HOT in the top left corner of LCD screen;if testing temperature higher than 80℃(176℉),the red indicator light will lighting on  and LCD screen display HH.H℃;

7. Product will enter into sleeping state after leaving the testing environmental more than 30mins(LCD screen no display),Press any button will activate the display;

Remark:

1. The testing environment is common fresh water environment;

2. In high temperature setting,if power off,the device will recover to initial data(40℃/104℉);

3. The max testing temperature can not more than 80℃(176℉),common testing environment temperature range is 20℃(68℉)-50℃(122℉);

4. In regular testing range,the waterproof grade is IP*7,if testing temperature is more higher,the waterproof grade will be more lower;